Jump to content

Electrician: Difference between revisions

From CIT Wiki
VisualWikitext
Created page with "== Electrician == The '''Electrician''' job involves maintaining and repairing electrical and network systems across San Andreas. You'll be assigned tasks such as fixing power wiring, resetting circuit breakers, and addressing network cable failures. This job requires careful attention to detail as incorrect actions can result in injury or death. === How to Get the Job === ---- The '''Electrician''' job can be found in two locations in San Andreas. You can access thes..."
 
No edit summary
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
== Electrician ==
= '''Electrician Job''' =
The '''Electrician''' job involves maintaining and repairing electrical and network systems across San Andreas. You'll be assigned tasks such as fixing power wiring, resetting circuit breakers, and addressing network cable failures. This job requires careful attention to detail as incorrect actions can result in injury or death.
The '''Electrician''' job involves maintaining and [[repairing]] electrical systems across San Andreas. As an Electrician, you will be assigned various tasks related to power wiring, circuit breakers, and network cable failures. It is a technical job that requires precision and attention to detail. Failure to do tasks correctly may result in injury or death, so it is important to follow the steps carefully.
 
Video tutorial: https://www.youtube.com/watch?v=emTZUJQC-FM
----
[[File:Electrician job.jpg|thumb|Electrician Job location]]


=== How to Get the Job ===
=== How to Get the Job ===
To start the '''Electrician''' job, you need to visit the job locations in '''Los Santos''' or '''San Fierro'''.
* '''Los Santos''': Near the Pay 'n' Spray.
* '''San Fierro''': Near the Motorbike Shop.
Once you are near the job site, type '''/gps''' and search for '''Electrician''' to get directions. When you arrive at the location, enter the yellow marker to take the job. Upon entering the job site, you'll be teleported inside a building where you will receive tasks related to electrical and network issues.
----
----


=== How to Complete Electrician Tasks ===
Once you start the job, you’ll see a list of tasks in your '''F5''' menu. The list will display the task number, the issue at the installation, the location of the task, and the distance from your current location.
To start a task:
# Select the task from the F5 menu.
# Travel to the location marked on your map (use '''F11''' for map navigation).
# Once you arrive at the task location, step into the yellow marker and press '''N''' to begin.
Tasks are divided into three categories:


The '''Electrician''' job can be found in two locations in San Andreas. You can access these locations using the in-game GPS with the command '''/gps'''.
==== 1. Blown Cables ====
This task requires you to repair blown cables by matching the colored wires:


* '''Los Santos''' – Near Pay 'n' Spray
* '''Yellow to Yellow'''
* '''San Fierro''' – Near the motorbike shop
* '''Blue to Blue'''
* '''Red to Red'''
* '''Pink to Pink'''


Enter the yellow marker at the job site to take the job.
Simply click on the wires that correspond to the same color. This is the simplest task, and if done correctly, it will always be successful.


=== How to Complete Electrician Tasks ===
----
----


==== 2. Circuit Breakers ====
For this task, you will need to reset the circuit breakers. They are numbered, and you must click them in ascending order (e.g., 1, 2, 3, 4, 5, 6). It’s a simple task, requiring you to click the breakers in the correct sequence.


Tasks will be assigned to you through a ticket system, accessible by pressing '''F5''' or using '''/jt'''. Each ticket will show the task description, its location, and the issue you're addressing.
----
 
==== 3. Network Cable Failure ====
The most complicated task involves fixing network cables. Here’s how to complete it:


Here are the main types of tasks you'll encounter:
* You will be presented with two cables.
* The goal is to align them perfectly in the center of the screen, using the faint white line in the middle as a guide. The cables should not overlap but should be perfectly aligned.


* '''Blown Cables''': Match wires by color (Yellow to Yellow, Blue to Blue, etc.).
If the cables aren’t aligned correctly, you will receive an error message. The possible error messages are:
* '''Circuit Breakers''': Click on the breakers in the correct numbered order.
* '''Network Cable Failure''': Align cables correctly by ensuring they’re placed exactly in the center of the screen, avoiding overlap.


Once you accept a task, a marker will be placed on your map showing the task's location. Travel to the site and step into the yellow marker to begin the task.
* '''Both cables not aligned''': Adjust both cables.
* '''Left cable not aligned''': Fix only the left cable.
* '''Right cable not aligned''': Adjust only the right cable.
* '''Cables are overlapping''': Move the cables apart.


=== Detailed Instructions for Each Task ===
----
----


# '''Blown Cables''':
=== Important Tips ===
#* Simply match the colored wires: Yellow to Yellow, Blue to Blue, Red to Red, etc.
 
#* This is a straightforward task with no chance of failure if done correctly.
* '''/shift Command''': Use '''/shift''' to quickly reset the task locations if they are bugged or hard to reach.
# '''Resetting Circuit Breakers''':
* '''Navigating Tight Spaces''': Use a '''BF-400 motorbike''' for easier access to hard-to-reach areas, especially in San Fierro’s narrow streets.
#* The circuit breakers will be numbered. You need to click them in ascending order. It's a simple task that requires basic number recognition.
* '''Network Cable Task''': Focus on one cable at a time. I recommend starting with the left cable and adjusting the right one based on its alignment with the left. If in doubt, use '''space bar''' to quickly check the alignment.
# '''Network Cable Failure''':
#* Align both cables in the center of the screen, ensuring they are perfectly bisected by the faint white line.
#* If you receive an error message, adjust the cables based on the instructions:
#** "Both cables not aligned" – Move both cables into alignment.
#** "Left cable not aligned" – Adjust the left cable.
#** "Right cable not aligned" – Adjust the right cable.
#** "Cables are overlapping" – Move the cables so they are no longer overlapping.


=== Job Ranks ===
----
----


 
=== Job Ranks & Requirements ===
The '''Electrician''' job has 10 levels. To advance, complete tasks and gain experience:
There are 10 levels in the '''Electrician''' job, based on the number of tasks completed.


* '''L0''': Short-circuit
* '''L0''': Short-circuit
Line 61: Line 80:
* '''L10''': Master Electrical Engineer – '''Req: 3,500 Tasks'''
* '''L10''': Master Electrical Engineer – '''Req: 3,500 Tasks'''


=== Commands and Tips ===
----
----


* '''/prefertask''': Available for L6+ electricians to choose a specific task type.
=== Commands for Electricians ===
 
* '''/prefertask''': For '''L6+ electricians''' to select a specific task type.
* '''/jt''': View available tasks.
* '''/jt''': View available tasks.
* '''/gps''': Use this to locate job sites.
* '''/gps''': Locate job sites.
* '''/shift''': Reset bugged locations or tasks.
 
=== Additional Tips ===
----


* '''Speed up your work''' by using the '''/shift''' command to reset tasks quickly, especially if the locations are too far apart.
[[Category:Civilian Jobs]]
* Consider buying a '''BF-400''' motorbike for quick navigation around narrow streets and alleys in San Fierro.

Latest revision as of 14:55, 23 April 2025

Electrician Job

The Electrician job involves maintaining and repairing electrical systems across San Andreas. As an Electrician, you will be assigned various tasks related to power wiring, circuit breakers, and network cable failures. It is a technical job that requires precision and attention to detail. Failure to do tasks correctly may result in injury or death, so it is important to follow the steps carefully.

Video tutorial: https://www.youtube.com/watch?v=emTZUJQC-FM

Electrician Job location

How to Get the Job

To start the Electrician job, you need to visit the job locations in Los Santos or San Fierro.

  • Los Santos: Near the Pay 'n' Spray.
  • San Fierro: Near the Motorbike Shop.

Once you are near the job site, type /gps and search for Electrician to get directions. When you arrive at the location, enter the yellow marker to take the job. Upon entering the job site, you'll be teleported inside a building where you will receive tasks related to electrical and network issues.

How to Complete Electrician Tasks

Once you start the job, you’ll see a list of tasks in your F5 menu. The list will display the task number, the issue at the installation, the location of the task, and the distance from your current location.

To start a task:

  1. Select the task from the F5 menu.
  2. Travel to the location marked on your map (use F11 for map navigation).
  3. Once you arrive at the task location, step into the yellow marker and press N to begin.

Tasks are divided into three categories:

1. Blown Cables

This task requires you to repair blown cables by matching the colored wires:

  • Yellow to Yellow
  • Blue to Blue
  • Red to Red
  • Pink to Pink

Simply click on the wires that correspond to the same color. This is the simplest task, and if done correctly, it will always be successful.

2. Circuit Breakers

For this task, you will need to reset the circuit breakers. They are numbered, and you must click them in ascending order (e.g., 1, 2, 3, 4, 5, 6). It’s a simple task, requiring you to click the breakers in the correct sequence.

3. Network Cable Failure

The most complicated task involves fixing network cables. Here’s how to complete it:

  • You will be presented with two cables.
  • The goal is to align them perfectly in the center of the screen, using the faint white line in the middle as a guide. The cables should not overlap but should be perfectly aligned.

If the cables aren’t aligned correctly, you will receive an error message. The possible error messages are:

  • Both cables not aligned: Adjust both cables.
  • Left cable not aligned: Fix only the left cable.
  • Right cable not aligned: Adjust only the right cable.
  • Cables are overlapping: Move the cables apart.

Important Tips

  • /shift Command: Use /shift to quickly reset the task locations if they are bugged or hard to reach.
  • Navigating Tight Spaces: Use a BF-400 motorbike for easier access to hard-to-reach areas, especially in San Fierro’s narrow streets.
  • Network Cable Task: Focus on one cable at a time. I recommend starting with the left cable and adjusting the right one based on its alignment with the left. If in doubt, use space bar to quickly check the alignment.

Job Ranks & Requirements

There are 10 levels in the Electrician job, based on the number of tasks completed.

  • L0: Short-circuit
  • L1: Cable Cutter – Req: 50 Tasks
  • L2: Wire Stripper – Req: 100 Tasks
  • L3: Connector Crimper – Req: 250 Tasks
  • L4: Advanced Electrician – Req: 500 Tasks
  • L5: Experienced Electrician – Req: 1,000 Tasks
  • L6: Veteran Electrician – Req: 1,500 Tasks
  • L7: Quality Controller – Req: 2,000 Tasks
  • L8: Field Operator – Req: 2,500 Tasks
  • L9: Field Supervisor – Req: 3,000 Tasks
  • L10: Master Electrical Engineer – Req: 3,500 Tasks

Commands for Electricians

  • /prefertask: For L6+ electricians to select a specific task type.
  • /jt: View available tasks.
  • /gps: Locate job sites.
Retrieved from "https://citwiki.com/index.php?title=Electrician&oldid=1178"