Jump to content

Crane Operator: Difference between revisions

From CIT Wiki
oldwiki>Jarrah
m 1 revision imported
 
m 1 revision imported: Clean reupload
 
(No difference)

Latest revision as of 15:22, 3 June 2026

Crane Operator

Crane Operator is a civilian dock job where you load and unload containers at Easter Basin Harbor in San Fierro.

Crane Operator dock cranes
Crane Operator dock cranes.

How the job works

Crane Operator is a Civilian job based around moving containers with dock cranes.

The job takes place at Easter Basin Harbor in San Fierro.

How to start

To become a Crane Operator:

  1. Go to Easter Basin Harbor in San Fierro.
  1. Take the Crane Operator job.
  1. Use Crane 1 or Crane 2 to start working.

Cranes

There are 2 cranes in the job:

  • Crane 1 is in the southwest and has 5 basic zones
  • Crane 2 is in the northeast and has 7 advanced zones

Crane 2 must be docked first.

How it works

As a Crane Operator, you load and unload containers with the crane.

Useful things to watch while working are:

  • The magnet load detector, which shows if your crane magnet is holding a container or not
  • The ground detection indicator, which shows if the container has touched the ground so you can place it accurately

Commands and Controls

Useful Crane Operator commands include:

  • /magnet to release a stuck container
  • /prefercrane 1
  • /prefercrane 2
  • /crane to enter or leave a crane
  • /camcr 0-5 to change the camera
  • /craneset to change crane keybinds
  • /cranesoud to turn crane sounds on or off

Preferred Crane

At Level 2 and above, you can use:

  • /prefercrane 1
  • /prefercrane 2

This lets you stay on your preferred crane.

Tips

Useful Crane Operator tips:

  • Use /prefercrane once you reach Level 2 to stay on your preferred crane
  • Check the magnet load detector
  • Check the ground detection indicator
  • Use /camcr for better visibility

Skin

Crane Operator uses these skin IDs:

  • 27
  • 260
  • 1032

Pay facts

Branch L0 without VIP L10 with VIP
Crane 1 loading $5,300 $12,720
Crane 1 unloading $5,700 $13,680
Crane 2 loading $4,600 $11,040
Crane 2 unloading $5,000 $12,000

L0 to L10 pay table

Level Crane 1 loading Crane 1 loading VIP Crane 1 unloading Crane 1 unloading VIP Crane 2 loading Crane 2 loading VIP Crane 2 unloading Crane 2 unloading VIP
L0 $5,300 $6,360 $5,700 $6,840 $4,600 $5,520 $5,000 $6,000
L1 $5,830 $6,996 $6,270 $7,524 $5,060 $6,072 $5,500 $6,600
L2 $6,360 $7,632 $6,840 $8,208 $5,520 $6,624 $6,000 $7,200
L3 $6,890 $8,268 $7,410 $8,892 $5,980 $7,176 $6,500 $7,800
L4 $7,420 $8,904 $7,980 $9,576 $6,440 $7,728 $7,000 $8,400
L5 $7,950 $9,540 $8,550 $10,260 $6,900 $8,280 $7,500 $9,000
L6 $8,480 $10,176 $9,120 $10,944 $7,360 $8,832 $8,000 $9,600
L7 $9,010 $10,812 $9,690 $11,628 $7,820 $9,384 $8,500 $10,200
L8 $9,540 $11,448 $10,260 $12,312 $8,280 $9,936 $9,000 $10,800
L9 $10,070 $12,084 $10,830 $12,996 $8,740 $10,488 $9,500 $11,400
L10 $10,600 $12,720 $11,400 $13,680 $9,200 $11,040 $10,000 $12,000

Progression

Crane Operator ranks are:

  • L0 Crane Trainee, 0 missions
  • L1 Trained Operator, 40 missions
  • L2 Class C Operator, 100 missions
  • L3 Class B Operator, 180 missions
  • L4 Class A Operator, 280 missions
  • L5 Specialized Heavy Lifter, 400 missions
  • L6 Crane Foreman, 550 missions
  • L7 Slinger, 750 missions
  • L8 Supervisor, 1,050 missions
  • L9 Site Manager, 1,550 missions
  • L10 The Crane, 2,600 missions

Achievement

The Level 10 civilian achievement for Crane Operator is:

  • Crane Whisperer

Job Notes

  • Crane Operator is at Easter Basin Harbor in San Fierro.
  • The job uses 2 cranes.
  • Crane 1 is the southwest crane.
  • Crane 2 is the northeast crane and must be docked first.
  • /crane lets you enter or leave a crane.
  • /magnet helps if a container gets stuck.
  • /camcr helps with visibility.
  • The job has a magnet load detector and a ground detection indicator.
  • At Level 2, you can use /prefercrane to stay on your preferred crane.

Related notes

  • Crane Operator uses a free camera, replacing /camcr 0, and zoom works with mouse3 or the mouse wheel.
  • Crane Operator fast movement uses LSHIFT as a toggle instead of a hold key.
  • /stats shows Crane Operator job level and progress.


Related commands

Command Use
/craneset Changes the crane controls.

See also